FreeArc and Inno Setup script

[notifier]

No, it's a "simple" file, with normal, or best assymetric method the compression ratio is 60%

[Bulat Ziganshin]

Polish translation of custom messages

can you please translate a few more strings for non-extended script version:

eng.ExtractedInfo=Extracted %1 Mb of %2 Mb
eng.AllProgress=Overall extraction progress: %1%%
eng.Extracting=Extracting: %1
eng.remains=Remaining time: %1
eng.LongTime=at no time

[Bulat Ziganshin]

No, it's a "simple" file, with normal, or best assymetric method the compression ratio is 60%

give us logfile text for this operation

[notifier]

This is not a very large problem, but the inno + freearc script is it, can you help me what am I do wrong?
I downloaded the latest scripts from the previous page, but not working, only the advanced script, but this with error too, and I don't want to chose from Full, or Custom install just simply "unarc" the files.

[Bulat Ziganshin]

This is not a very large problem, but the inno + freearc script is it, can you help me what am I do wrong?
I downloaded the latest scripts from the previous page, but not working, only the advanced script, but this with error too, and I don't want to chose from Full, or Custom install just simply "unarc" the files.

i can't search error in *your* script. what is the concrete problem with *my* script?

[notifier]

I don't know, I compiled the program and said: decompression error -1
The code part in my script is from your script.
I don't know whats the problem I tried a lot of configurations but always the same decompression error, or simply freeze it.
But your example setup works fine.

*Update: I think the problem is that kasperksy recognizes your unarc dll as trojan, when I try to run my installer, Kaspersky blocks the decompressed files becuase are "trojan generic".
Also I can't download your older releases of freearc.

[mondragon]

can you please translate a few more strings for non-extended script version:

eng.ExtractedInfo=Extracted %1 Mb of %2 Mb
eng.AllProgress=Overall extraction progress: %1%%
eng.Extracting=Extracting: %1
eng.remains=Remaining time: %1
eng.LongTime=at no time

eng.ExtractedInfo=Wypakowano %1 Mb z %2 Mb
eng.AllProgress=Całkowity postęp wypakowywania: %1%%
eng.Extracting=Wypakowywanie: %1
eng.remains=Pozostały czas: %1
eng.LongTime=at no time

eng.LongTime=at no time
not used in script and i must see in gui in context

=====
notifier

do what i write on pm on cd-2-dvd
and turn off for test kaspersy for the compiling/installing time

====
edit2
after testing that weird cases it looks that script [unmodified too] not compatible with ispack-5.3.7-unicode.exe - lastest version
with older 523 non unicode works flawless and even create near 400KB file not 600KB
and with non unicode version the same things -non working

[notifier]

Yes, the 5.3.7 compiled bad exe and Kaspersky thought it's a virus.

[qallas]

Pack error.How can I do?

[mondragon]

use older version of inno

[notifier]

Hello!
When I want to decompress more files, but for example:

I have 1.arc in DVD1 and setup in DVD1, and 2.arc in DVD2.
How can I add the 2.arc to the innoscript to ask for the disk contains the file, like for the "normal" inno files?

Archives = '{src}\*.arc';

I think I need to modify this section.

[Bulat Ziganshin]

no, you need to use special script: http://rghost.ru/901554

[notifier]

I using ISSI script for custom wizard images, when I try to use Freearc Script I get: duplicate identifier, CUREPAGECHANGED.
How can I change images when I use freearc script?

[Bulat Ziganshin]

i think you should learn pascal

[notifier]

Ok, I already solved.
Now:

#define Archives "{src}\data1.bin;DestDir:{app}\;Disk:1;Components:Russian|{src}\data2.bin;DestDir:{app}\data;Disk:1;Components:English|{src}\data3.bin;DestDir:{app}\data2;Disk:1|{src}\data4.bin;DestDir:{app}\data3;Disk:2"

So I must rename, or compress my arc archives to bin?
I can't understand this part of the script.

[Bulat Ziganshin]

try bioth. this script isn't mine

[notifier]

Not working, for this I need preprocess with precomp, and the install takes too long.

[Bulat Ziganshin]

updated http://freearc.org/ru/InnoSetup.aspx

[Vacon]

Hello everyone,

updated http://freearc.org/ru/InnoSetup.aspx

Time to refresh our russian (or to stay with older version)

Best regards!

[Bulat Ziganshin]

yes. i don't want to transalte page into english since most scripts are russian-only anyway

but it's wonderful how quick this "industry" evolves. most of these scripts/libs/tools were created or updated in last 3 months

the most useful things are Shegorat's script 2.6 that is my own script with many need-to-have improvements, and ISDone package what is able to decompress nearly everything (freearc, 7z, precomp, srep, rar)

[Bulat Ziganshin]

we are now working on new version of script with i18n support. if you will provide translation of thw following lines, it will be included in the script. thanks in advance!

eng.ArcBreak=Installation cancelled!
eng.ArcError=Decompression failed with error code %1
eng.ErrorUnknownError=Error occured while extracting archives. Please contact the author of this program.
eng.ErrorCompressMethod=Compression method "%1" of the acrhive "%2" is not supported by the current version of unarc.dll
eng.ErrorOutBlockSize=Output block is too small for the archive "%1"
eng.ErrorNotEnoughRAMMemory=Not enough memory to unpack "%1" archive
eng.ErrorReadData=Archive "%1" data read error
eng.ErrorBadCompressedData=Data can't be extracted from the archive "%1"
eng.ErrorNotImplement=Required action isn't supported by the current version of unarc.dll
eng.ErrorDataAlreadyDecompress=Data block of the archive "%1" is already decompressed
eng.ErrorUnpackTerminated=User cancelled the operation
eng.ErrorWriteData=Error occured while processing the archive "%1"
eng.ErrorBadCRC=Bad CRC in the archive "%1"
eng.ErrorBadPassword=Applied password for archive "%1" isn't correct
eng.ErrorBadHeader=Header of the archive "%1" is corrupted
eng.ErrorCodeException=Raised a code exception. Please contact the author of this program.
;eng.ErrorNotEnoughFreeMemory=
eng.ErrorNotEnoughFreeSpace=Not enough free space to unpack "%1"
eng.ArcTitle=Extracting FreeArc archives...
eng.StatusInfo=Files: %1%2, progress %3%%, remaining time %4
eng.ArcInfo=Disk %1 of %2, archive %3 of %4, %5%% of archive processed
eng.ArcFinish=Unpacked archives: %1, received files: %2 [%3]
eng.InsertDisk=Please insert disk # %1 with file "%2" and press OK.
eng.taskbar=%1%%, %2 remains
eng.ending=Ending
eng.hour= hours
eng.min= mins
eng.sec= secs

[zody]

I'll try to..feel free to improve it

ger.ArcBreak=Installation abgebrochen!
ger.ArcError=Entpacken brach mit dem Fehlercode %1 ab.
ger.ErrorUnknownError=Ein Fehler trat beim entpacken auf. Kontaktieren sie den Autor des Programms.
ger.ErrorCompressMethod=Die Kompression-Methode "%1" von dem Archive "%2" wird von der aktuellen Version von unarc.dll nicht unterstuetzt.
ger.ErrorOutBlockSize=Ausgabe Block ist zu klein fuer das Archiv "%1"
ger.ErrorNotEnoughRAMMemory=Nicht genug freier Speicher um das Archiv "%1" zu entpacken.
ger.ErrorReadData=Archiv "%1" Daten-Lese-Fehler
ger.ErrorBadCompressedData=Daten konnten nicht aus dem Archiv "%1" entpackt werden.
ger.ErrorNotImplement=Die benoetigte Funktion wird noch nicht von unarc.dll unterstuetzt.
ger.ErrorDataAlreadyDecompress=Daten Block des Archivs "%1" ist bereits entpackt.
ger.ErrorUnpackTerminated=Abbruch durch Benutzer.
ger.ErrorWriteData=Ein Fehler ereignete sich beim bearbeiten von Archive "%1"
ger.ErrorBadCRC=Falsche CRC-Pruefsumme in Archiv "%1"
ger.ErrorBadPassword=Passwort fuer Archiv "%1" ist falsch.
ger.ErrorBadHeader=Header des Archivs "%1" ist beschaedigt.
ger.ErrorCodeException=Code Ausnahme erkannt. Kontaktieren sie den Autor des Programms.
;ger.ErrorNotEnoughFreeMemory=
ger.ErrorNotEnoughFreeSpace=Nicht genug freier Speicher um "%1" zu entpacken!
ger.ArcTitle=Entpacke FreeArc Archive...
ger.StatusInfo=Dateien: %1%2, Fortschritt %3%%, verbleibende Zeit %4
ger.ArcInfo=Disk %1 von %2, Archiv %3 von %4, %5%% vom Archiv bearbeitet.
ger.ArcFinish=Entpackte Archive: %1, erhaltene Dateien: %2 [%3]
ger.InsertDisk=Bitte legen Sie Disk # %1 mit der Datei "%2" ein und druecken Sie OK.
ger.taskbar=%1%%, %2 verbleibend
ger.ending=Fertigstellen
ger.hour= Stunden
ger.min= Minuten
ger.sec= Sekunden

I will make some edits from time to time

[Vacon]

Hello everyone,

call me pedantic, but some minor improvements:
a typo in Bulat's english version

eng.ErrorCompressMethod=Compression method "%1" of the archive "%2" is not supported by the current version of unarc.dll

in german version:

ger.ErrorUnknownError=Ein Fehler trat beim Entpacken auf. Kontaktieren sie den Autor des Programms.
ger.ErrorCompressMethod=Die Kompressions-Methode "%1" des Archivs "%2" wird von der aktuellen Version von unarc.dll nicht unterstuetzt.
ger.ErrorWriteData=Ein Fehler ereignete sich beim Bearbeiten des Archivs "%1"
ger.ErrorCodeException=Code-Ausnahme erkannt. Kontaktieren sie den Autor des Programms.
ger.ArcTitle=Entpacke FreeArc-Archive...
ger.ArcInfo=Disk %1 von %2, Archiv %3 von %4, %5%% des Archivs bearbeitet.

Sadly this forum doesn't accept german "Umlaute". If it is of interest, attached there is a file with these used.
Thanks to Zody for doing the main work! :thumbs-up:

Best regards!

[zody]

Thanks Vacon,
I corrected the txt file. There was a mistake..

Die Kompressions-Methode "%1" von des Archivs "%2" wird von der aktuellen Version von unarc.dll nicht unterst?tzt

Regards!

[Vacon]

Hello everyone,

well, if that's not teamwork -> what else...?

Best regards!

[VoLT]

-Delete-

[Omnikam]

Could someone look at translating this Inno setup from Russion into English
Edit I translated it this is the file for any interested
http://www.fileden.com/files/2010/3/1/2779608//gta sa english.rar
It perhaps the best script ive seen, Uses any custom bmp as splash screen and plays an mp3 while your program installs
FreeArc implemented also
I havnt been able to get it to decompress arc files. not sure why yet?
Update, It actually compresses a Select Folder at build time

[Bulat Ziganshin]

ISFreeArcExtract v.4.0:

Version 4.0 ext by Shegorat, 15-10-2010
* Added support of encrypted archives
* Added a more detailed description of any errors
* Added new language - German

Version 2.6 ext by Shegorat, 04-07-2010
* Fixed a hung application problem
* Fixed finction AnsiToUtf8
* Fixed some errors
* Improved Archives string decode function

Version 2.5 ext by Shegorat, 19-05-2010
* Added a check to unpack archives only once
* Fixed some errors
* Changed archive status string
* Added script with ISPrecomp (now not supported)
* Updated unarc.dll

Version 2.4 ext by Shegorat, 20-04-2010
* Fixed unpack, if archives from one disk go in several disks (example DVD9 => 2xDVD5)
* Fixed a general progressbar, it doesn't get reset when a new disk inserted
* Fixed remains time string, now time not qual 0
* The algorithm of counting unpacked files was rewritten, so it doesn't get reset when a new disk is inserted
* Total number of unpacked files doesn't get reset when a new disk is inserted
* Minor tweaks

Version 2.3 ext by Shegorat, 28-01-2010
* Fixed unpack, if archives from several disks go in one dsik
* Fixed unpack with components

Version 2.2 ext by Shegorat, 26-01-2010
* Script based on FreeArc_Example-Ext v.3.5.iss
* Added inquire of 2nd and next disks
* Added unpack in different folders
* Archives can be added via #define Archives

Can someone work on correcting grammar errors in english readme?

[Bulat Ziganshin]

Omnikam, there are lot of them here. translation is the only problem

[zody]

Thanks Bulat,
The compiler found some semicolons missing..after adding them script works nice =)
If I were a native English speaker, i would correct grammar...